Selecting The Sound Mode - Samsung CS29Z45 Owner's Instructions Manual

Sound -
(depending on the model)
Mode / Adjust / Auto Volume / Turbo Plus
 Mode : Standard / Music /
TV
Movie / Speech / Custom
Mode
Adjust
You can select the type of
Auto Volume
special sound effect to be
Turbo Plus
used when watching a given
broadcast.
You can select these
➢
Move
options by pressing
TOOLS button to enter Sound Mode.
 Adjust : Bass / Treble / Balance
The television has several settings which allow you to
control the sound quality.
If you make any changes to these settings, the sound
➢
mode is automatically switched to Custom.
 Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
 Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channels.
You can select the options by pressing TOOLS button
➢
to enter Turbo Plus.

Selecting the Sound Mode

(depending on the model)
Pressing TOOLS button to enter Dual l-ll/controls the
Sound processing and output of the audio signal. When power
: Standard ►
is switched on, the mode is automatically preset to either
►
"Dual-I " or "Stereo", depending on the current transmission.
: Off
►
: Off
►
NICAM Stereo
◆
Type of broadcast
Enter Exit
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
A2 Stereo
◆
Type of broadcast
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
Stereo
If the receiving conditions deteriorate, listening will
◆
➢
be easier if the mode is set to the Mono.
If the stereo signal is weak and an automatic
◆
switching occurs, then switch to the Mono.
When receiving a mono sound in the AV mode,
◆
connect to the "AUDIO-L" input connector on the
panel (front or side). If the mono sound comes out
only from left speaker, press the DUAL I-II button.
On-screen indication
Mono
(Normal use)
Mono Mono
↔
NICAM (Normal)
Stereo Mono
↔
NICAM (Normal)
Dual-I Dual-II Mono
↔ ↔
NICAM NICAM (Normal)
On-screen indication
Mono
(Normal)
Dual-I Dual-II
↔
Mono
Stereo
↔
(Forced mono)
English - 6
TOOLS
(depending on the model)
Use to quickly select frequently
used functions. Sleep Timer
Picture Mode
Sound Mode
You can press TOOLS
Dual I-II
➢
Turbo Plus
button and check the
Sound Adjust
Sleep Timer/Picture
Move
Mode/Sound Mode /Dual
I-II/Turbo Plus/Sound Adjust by </ > button.
The detail information please refer to page2
Tools
◄ Off ►
◄ Dynamic ►
◄ Standard ►
◄ Mono ►
◄ Off ►
Adjust Exit