Samsung CS29Z45 Owner's Instructions Manual page 2

Remote Control
(depending on the model)
➢ Operation of remote control may be affected by bright
artificial light near to the TV.
1 POWER 3 ▲/▼/◄/►
Used to switch the TV Used to control the
on and off. cursor in the menu.
2 MENU
P < / >
Used to display the
Used to display the
on-screen menu or
next or previous stored
return to the previous
channel
menu.
= + / -
Used to increase or
decrease the volume.
5. Turbo Plus(Used to
4 MUTE
select the Turbo Plus
Used to switch the
option.)
sound off temporarily.
6. Sound Adjust (Used
To turn the sound back
to display the sound
on, press the MUTE,
menu)
= + or = - button.
9 ENTER
5 Numeric buttons
While using the
Used to select channels
on-screen menus,
directly.
press the ENTER
6 INFO
button to activate (or
Used to view the
change) a particular
channel information
item.
and setting status you
0EXIT
selected.
Used to exit from any
7 SOURCE
display or return to
Used to display all of
normal viewing.
the available video
! PRE-CH
sources.
Used to switch
8 TOOLS (depending on
repeatedly between
the model)
the last two channels
You can check the
displayed.
following selection by
pressing Tools button.
1. Sleep Timer(Used to
select a preset time
interval for automatic
turn off.)
2. Picture Mode(Used
to select the picture
effect.)
3. Sound Mode(Used
to select sound
effect.)
4. Dual I-II(Used to
select sound mode.)
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not
operate normally, check that the "+" and
"-" ends of the batteries are inserted correctly or the batteries
are drained.
Do not mix battery types, i.e. alkaline and manganese.
➢
English - 2
Switching the Television On and Off
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the
➢
television and the frequency is 50 or 60Hz.
2 Press the "P" button (On/Off) CH</> button on the
front (or side) of the television.
3 Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to "Channel - Auto Store" on page 3 or "Channel -
Manual Store" on page 3.
➢ I f the television is initially powered on, several basic
customer settings proceed automatically. Refer to
"Setup - Plug & Play" on page 3.
4 Press the P</> button, or Numeric button on the
remote control.
Caution: One pole switch is totally not off (one line still
➢
live) if power cord is not unplugged.
Placing the Television in Standby Mode
The television can be placed in standby mode, in order to
reduce power consumption and wear of the cathode ray
tube. Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER button on the remote control while
viewing.
2 To switch the television back on, simply press it again.
☛
Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
example).
It is best to unplug the set from the mains and aerial.