Daily Use; Selecting A Programme Number; Volume And Picture Control; Timer - Daewoo DTU-14D3 Instruction Manual

Table of Contents

Advertisement

DAILY USE

SELECTING A PROGRAMME NUMBER

The set has a total of 100 programme number, 0..99.
The NUMBER buttons 0..9 are used for direct programme selection.
In order to select two-digit programme, press the second numbered but-
ton within two seconds.
Switch through the programme number step by step with the UP/DOWN
buttons.

VOLUME AND PICTURE CONTROL

VOLUME CONTROL
Adjust the volume with the VOLUME DOWN/UP buttons on the front of the
set, or with the LEFT/RIGHT buttons on the remote controller.
MUTE
Pressing the MUTE button once turns the sound off.
The sound returns if the button is pressed once more.
NORMAL PICTURE SELECTION
When you press the OK button repeatedly you can call up three picture
settings;
for NORMAL I(hard picture), NORMAL II(soft picture), FAVOURITE
(adjustable picture).
PICTURE CONTROL
Press the MENU button to call up the MAIN MENU.
Press the OK button to call up the PICTURE MENU.
You can select each function with the UP/DOWN buttons.
Use the LEFT/RIGHT buttons to adjust each function:
BRIGHTNESS(
) - CONTRAST(
SHARPNESS(
) - TINT(
* Yon can set BB function ON/OFF by using LEFT/RIGHT buttons. If you
set BB function ON, you can see the blue-colored screen when the TV
receives no signal.
* The TINT is active only in NTSC system.
* The picture-controlled value is stored in FAVOURITE mode automatically.
In the MAIN MENU, Select TIMER menu.
SETTING THE CLOCK
Press the OK button on the CLOCK line.
Set the hour and minute with the NUMBER buttons 0..9. Press the OK but-
ton to complete. The clock will start.
Note that if you turn the TV off with MAIN POWER button, the clock set-
ting is lost and must be reset if necessary.
SETTING THE OFF TIME
Set OFF TIME in the same way as the SETTING THE CLOCK above. Set
ACTIVATE "YES" or "NO" with the LEFT/RIGHT buttons. When ACTI-
VATE is "YES", the function is enabled.When OFF TIME is operative, the
set will switch off at the set time.
SETTING THE WAKE UP TIME
Set WAKE UP TIME in the same way as the SETTING THE CLOCK
above.
Set ACTIVATE "YES" or "NO" with the LEFT/RIGHT buttons.
When ACTIVATE is "YES", the function is enabled.
Set WAKE UP PROG using the NUMBER buttons 0..9 or UP/DOWN but-
tons.
When WAKE UP TIME is operative, the set will switch on to this pro-
gramme number at the set time.
) - COLOUR(
) -
) - BLUEBACK(BB).

TIMER

6
6
PICTURE
31
63
31
31
00
BB
ON
TIMER
CLOCK
12:20
OFF TIME
--:--
WAKE UP TIME
--:--
ACTIVATE
YES
WAKE UP PROG
P 45
TIMER
CLOCK
12:20
OFF TIME
23:50
WAKE UP TIME
07:00
ACTIVATE
YES
WAKE UP PROG
P 45
TIMER
CLOCK
12:20
OFF TIME
--:--
WAKE UP TIME
1
7:00
ACTIVATE
YES
WAKE UP PROG
P 45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dtu-21d3Dtu-14d4Dtu-20d4Dtu-21d4Dtu-20d3

Table of Contents