Manual Channel Setting - Daewoo 2594ST Instruction Manual

MANUAL CHANNEL SETTING

You can also call up the PRESET menu at the MAIN MENU.
Press the NUMBER button 0..9 or UP/DOWN buttons to select a
programme number you want.
The screen will change according to the selected programme
number.
SEARCHING A CHANNELS
Locate a cursor to "
press the UP or DOWN button.
The tuning screen will appear and the cursor will move from left
to right.
Pressing and holding down the UP/DOWN button during 2 sec-
onds, the band will change as following:
VL-VH-U (For GB, U only).
After searching a station, the tuning screen will disappear.
To stop searching, press the MENU button.
FINE TUNING
If you are unable to get a good picture or sound because of a
poor broadcasting signal, it is possible to adjust the fine tuning.
Move the cursor to
vate fine tuning up or down.
It only operates while the UP or DOWN button is being pressed.
The changes is memorized automatically.
ENTER A STATION NAME
Select station name in the station name list with UP/DOWN
button and press OK button.
If you want to delete a station name, select "----".
If you can't find the desired name in the list, you can enter your
own.
To do so, move the cursor to the right and press OK button. Using
the UP/DOWN button, select the desired letter, number or blank.
Press the RIGHT button to select the next position.
Press the OK button to complete this procedure.
TO STORE PROGRAMME IN MEMORY
Move the cursor to the right end with the LEFT/RIGHT button.
Select the programme number that you want to store current dis-
playing programme with station name and system in memory
using the UP/DOWN button or NUMBER 0..9.
Press the OK button.
6
" with LEFT/RIGHT button and then
and press UP or DOWN button to acti-
PRESET
P01
SEARCH UHF
PRESET
P01
FINE TUNE UHF
PRESET
P01
- - - -
DRFS
BBC1
BBC2
ITU
CH4
PRESET
P01 BBC1
PRESET
P01 BBC1
P
>>
P
>>
P
P
P02