Adjusting Screen Size - Daewoo PXT-42BSTD Instruction Manual

Adjusting Screen Size

Adjusting
Screen Size
• You can adjust
screen size or
aspect ratio as
desired.
POWER
VIDEO/
TV DVD SAT CATV
DISPLAY
TV/VIDEO MULTIMEDIA
CH
V V
MENU
O
O
L L
CH
MUTE CAPTION
F.R/SLOW PLAY F.F/SLOW
REC STOP PAUSE
PREV OPEN/CLOSE NEXT
PICTURE SOUND
MODE MODE STILL
ADD/
MTS ERASE SLEEP
48
1
Press the "SCREEN SIZE" Button.
• Each time you press the "SCREEN SIZE" button on the Remote
Control, a different "SCREEN SIZE" appears. The sequence
used is as follows:
• The current screen size will be displayed on the screen.
NOTES:
1) When the INPUT SIGNAL is DTV [in Component 1 or
Component 2], only the aspect ratios of 16:9 and 4:3 are
available.
2) Displaying a picture in a 4:3 mode for a long time may cause
phosphor of the PDP to be burned. So avoid displaying a
picture in 4:3 screen size for a long time.
3) 16:9
4:3
Enlarge LB : Enlarges the screen as to fill the black part of
Enlarge LBS : Enlarges the screen, and shifts up as to see
Panorama
4) If the picture shows unclear image in the 480p component
input source, try to toggle the resolution from the [MENU]-
[Screen]-[DTV/DVD]. This menu appears only when the input
signal is component 480p.
16:9
Panorama
: Theater-like 16:9 picture formats
: 4:3 picture formats like an Analog TV.
up and down.
the subtitles in case you are watching video
with subtitles.
: 16:9 picture formats with panorama effect.
4:3
Enlarge LB
Enlarge LBS