Remote Control - Daewoo PXT-42BSTD Instruction Manual

Remote Control

The number in (
*
the function of each button is explained in detail.
TV/VIDEO(DVD)/SAT/CATV
21 Channel number (0~9)
Use to select channel directly 0~9
60 Display button
Indicates the current state and resolution.
58
Use this function to make video input selection.
It changes in the following sequence
TV -> Video1 -> Video2 -> TV
52
Used to zoom the screen. To enlarge, press the(+)
button, and to return to the previous condition, press
the(-) button.(Zoom Mode : Zoom 0~20)
22
Used to display a desired menu.
Previous Channel button
It returns to previous channel.
20
45
Picture Mode button
Every press of the button cycles through the
Normal -> Dynamic -> Cinema -> User.
57
This feature allows you to select the language and
stereo sound while broadcasting
24
CHANNEL ADD/ERASE
The feature either memorizes the current channel
or erases a channel that has previously
When Using Remote Control:
•
Be sure not to allow the Remote Control to drop or to become wet.
•
Keep it away from hot or moist locations.
) indicates the page in which
TV/VIDEO
TV/VIDEO
ZOOM button
V
O
L
Menu button
Mute button
Mute sound.
four different.
MTS button
memorized.
Note
• Use two "AAA" batteries.
• Be sure to use replacement batteries of the
• The life of a battery depends on how much
POWER
Power button
VIDEO/
Pressing the Power button of the TV allows
TV DVD SAT CATV
the Display to be standby. (Red light is
shown in the Remote Control Sensor.) At
this time, if you press the Power button of
the Remote Control, the Display is turned
ON (Green light in the Sensor).
100
DISPLAY
Use it when selecting a channel number of
MULTIMEDIA
over 100
CH
Multimedia
Use this function to make video input selection.
V
It changes in the following sequence PC -> DVI
MENU
O
L
-> Component 1-> Component 2 -> PC
CH button
CH
Volume button
MUTE CAPTION
Screen Size button
F.R/SLOW PLAY F.F/SLOW
Adjusts the size of the screen
REC STOP PAUSE
(Normal, 16:9, etc.)
PREV OPEN/CLOSE NEXT
Caption button
PICTURE SOUND
MODE MODE STILL
This feature allows you to choose the caption.
VIDEO/DVD Function
ADD/
MTS ERASE SLEEP Still button
Used to view a still picture during watching
moving images.(Sound can be heard.)
Sound Mode button
Every press of the button cycles through the five different
modes: Normal -> Movie -> Music -> News -> User.
Sleep Timer button
Each time you press this button, a different input mode
appears. The sequence is as follows: 15Min. -> 30Min. ->
60Min. -> 90Min. -> 120Min. -> OFF
After the time is selected, it automatically becomes stand-
by state.
Installing the Batteries in your Remote Control:
•
Push to open the cover of the remote controller
•
Set the batteries in the battery cell after checking the
electrode, and then shut the cover.
same type as the original ones.
it has been used.
20
58
/
Adjusts the channel.
/
Adjusts the volume.
48
65
54
55
77
15