Cycle Screens - Kenmore 796.2947 Series Use & Care Manual

WARNING: Toreduce t heriskofnre, e lectrlc s hack, oriniurv t opersons, read andfo,owthis
entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.
CYCLE SCREENS
The futt color LCD touch screen controls are operated
by touching the icons or various areas of the screen as
described in this Use &Care Guide. Touching the icons,
buttons or tabs changes the displayed information or
navigates among the different screens. In some cases,
special popup screens
will
be displayed to confirm
your choices or to give you certain information about
the operation or function. Operating guides and other
information are also available on the PREFERENCES
screen as described on pages 25 and 26.
*The HOME screen will dim after four minutes of
inactivity. Touch the screen to brighten the screen,
view the display, make additional changes or operate
the washer. If no icons are touched after the screen is
reactivated, or if the screen remains dimmed for one
minute when a cycle is not running, the control will
shut off and all settings will be lost.
0
0
POWER (ON/OFF) BUTTON
Press the POWER button to turn the washer ON. The
start up screen will display the logo briefly while the
graphics are loading, fotlowed by the HOME screen.
Press the button again to turn the washer OFF. Pressing
the POWER button during a cycle will cancel that
cycle and any settings will be lost.
NOTE: Water remaining in the tub after the power is
turned off: will be drained (refer to page 24).
O CYCLES
The top row of the HOME screen displays cycle
names and icons; the default cycle will be Normal/
Casual. The display will show five cycles at a
time. Saved MyCycles for the selected user will be
displayed on either side of the Normal/Casual cycle.
Refer to the cycle guide on pages 14-15.
G AVIGATION ARROWS
Use the arrows to navigate through the available
cycles. The display shows five cycles at a time. Touch
the arrows to scroll the cycle list to the right or left.
The cycles are displayed in a looped list so that all
cycles are available in either direction.
O YCLE SETTINGS AND OPTIONS BUTTONS
This row of buttons accesses the cycle settings and
options. Touching these buttons changes the display
to allow adjustments to the settings or the selection of
options (refer to pages 20-24).
O
O
O
O
12
START
Touch the START button to start the selected cycle.
Once the cycle has been started, the TIME & STATUS
screen will be displayed (refer to next the page).
CONTROL LOCKOUT
Touch and hold the Control Lockout icon for five seconds
to disable all of the controls except for the POWER but-
ton. This feature can prevent children from changing set-
tings or operating the machine. Once locked, the control
will remain locked until manually unlocked (refer to page
24).
USERS
Touch the Users icon to change the selected user, or to
access the MANAGE USERS screen (refer to pages 27-
28).
PREFERENCES
Touching the Prefs icon accesses the onboard Use
& Care information and the system settings. Use &
Care information includes stain treatment guides,
cycle setting and option information. System settings
information includes language selection, chime
volume, screen brightness and installation guides
(refer to pages 25-26).