Kenmore 790.9720 Series Use & Care Manual page 30

Setting Oven Controls
Using AirGuardTM feature
Your appliance is equipped with a catalytic oven exhaust
cleaner that may be turned on during any active oven
cooking process. This feature helps remove smoke and
eliminates 85% of the odors generated when using your
oven.
The AirGuard indicator light will glow anytime the
AirGuard feature is actively cleaning (See Fig. 1).
Air
Guard ®--indicator
light
Fig. 1
If you wish to have this feature clean the oven exhaust
Air_
keypad.
AFTER oven cooking has started, press Guord
Air_
keypad.
To turn this feature off, press Guord
Important note:
AirGuard will turn on automatically and cannot be
manually turned off when Flex Clean is active.
Operating oven lights
The interior oven lights will automatically turn ON when the
oven door is opened.
Press _J to turn the interior oven light ON and OFF
whenever the oven door is closed.
Accent light
Your appliance includes a decorative Accent light centered
horizontally behind the touch-sensitive control panel. The
Accent light provides a theatre style intensity feature that
slowly increases brightness at turn on and slowly fades
when turning off.
When the Accent light is off, the light is in automatic mode
by default. This means the Accent light will turn on
automatically when an oven, cooktop function or features
such as the Timer have been activated. The Accent light
will turn off automatically when these functions or features
are no longer active.
When the Accent light is OFF, it may be manually turned
ON by pressing the Accent Light keypad once. When the
Accent light has been manually turned on, it will remain on
until manually turned off by pressing the Accent Light
keypad again.
The brightness of the Accent light may also be adjusted.
Example - To adjust Accent light brightness:
1. Press and hold the Accent Light keypad until an
acceptance tone sounds (about 6 seconds).
2. The default brightness setting of 100 will appear in the
display (Fig. 2).
3. Using the numeric keypads, enter any digit from 0 to
100 to change the brightness level. Entering 0 (Fig. 3)
will effectively turn the Accent light OFF until the
brightness level is adjusted to a higher level.
4. Press START t o save the desired brightness setting.
The interior oven lights are located on the rear wall of the
oven interior and are covered with a glass shield. The glass
shield protects the bulb from high temperatures and should
always be in place whenever the oven is in use.
To replace the interior oven lights, see Replacing oven
lights in the Care & Cleaning section.
Fig. 2 Fig. 3
Important note:
To check the brightness level after adjusting, press the
Accent Light keypad once to check. If the brightness needs
further adjustment repeat steps 1, 3 and 4 above.
3O