Q-See QT528 Quick Start Manual page 6

Power and Camera Set Up
Mount Power
STEP 9
Distribution Panel
1 Read the instructions included with the
Power Distribution Panel before continuing.
2 Find a suitable location to mount the Power
Distribution Panel. It should be located near to
where the DVR will be located.
3 Use the included template to properly position
the mounting screws.
4 Mount box.
5 Be certain that the power switch is set to OFF
before attaching the power cord.
6 Lock the front panel to prevent unauthorized access.
STEP 10
Connecting the Cameras
1
Connect the BNC and power connectors on one end of the 60-foot cable to the
matching connectors leading from the camera.
NOTE: The male power end fits into the matching power cable on the camera.
2 3 3
Connect the BNC
connector on the other
end of the cable to any of
the Video In ports on the
back of the DVR.
2
4
Repeat for each camera included with this package to ensure
proper connection and function.
Plug the remaining power Plug the remaining power
connector into one of the connector into one of the
DC power jacks on the DC power jacks on the
side of the Power side of the Power
Distribution Panel. Distribution Panel.
3
1
STEP 11
Powering Up
Plug in Power Distribution Panel and turn on. Plug in Power Distribution Panel and turn on.
You should now see
a live video image
from your camera.
You may now mount your cameras.