Kenwood KDC-BT48DAB Instruction Manual page 31

6
Remove the application film (tag III).
Do not touch the lead terminal of film antenna (F).
7
Set the postion of the protrusion of the amplifier unit (G) with the
K on the film antenna (F) and paste.
Do not touch the lead terminal or the pasting surface (adhesive side)
of the amplifier unit (G).
• When installing the antenna on the right side
Set the position of the protrusion with K mark
Earth sheet
(F)
(G)
Lead contact of the amplifier unit
(metal part)
• When installing the antenna on the left side
Earth sheet
(F)
Application film (tag III)
Lead terminal of the film antenna (F)
(G)
(F)
Set the position of the protrusion with J mark
8
Remove the film covering the earth sheet and paste the earth sheet
on the metal part of the vehicle.
Provide sufficient leeway for the earth sheet so that it does not
interfere with the interior parts (front pillar cover). Also take care that
the interior parts do not interfere with the amplifier unit (G).
(G)
Front pillar cover
9
Wire the antenna cables.
Use cable clamper (H) to secure the antenna to the pillar at several
positions.
10
Attach the front pillar cover back to its original position.
Be sure not to damage the earth sheet and amplifier unit (G) when
covering.
11
Connect the amplifier unit (G) to the DAB input terminal on the rear
of the unit.
12
Set [DAB ANT POWER] to [ON]. ( 5)
Windscreen
Earth sheet
27