Kenwood KDC-BT48DAB Instruction Manual page 24

TROUBLESHOOTING
Symptom Remedy
"NA DEVICE" appears. Connect a supported USB device, and check the connections.
"NO MUSIC" appears. Connect a USB device that contains playable audio files.
"iPod ERROR" appears. • Reconnect the iPod.
• Reset the iPod.
Noise is generated. Skip to another track or change the disc.
Tracks do not play back as Playback order is determined when files are recorded.
you intended them to play.
"READING" keeps flashing. Do not use too many hierarchical levels or folders.
Elapsed playing time is not This is caused by how the tracks are recorded.
correct.
Correct characters are not This unit can only display uppercase letters, numbers, and a
displayed (e.g. album name). limited number of symbols. Uppercase Cyrillic letters can also
be displayed if [RUSSIAN SET] is set to [BКЛ]. ( 5)
"ACTN DISABLE" An unavailable operation has been performed.
"AHA APP UPDATE Make sure you have installed the latest version of the Aha
REQUIRED" application for KENWOOD application on your device.
"AHA UNAVAILABLE" Your device cannot be connected to Aha Radio server.
"CHECK APP" There is no response from Aha server.
"CHECK DEVICE" Check the Aha application on your device.
"CONNECT PHONE" Connect your device to the unit.
"LOGIN FAILED" Logging into Aha has failed.
"NETWORK The network has been disconnected.
UNAVAILABLE"
"POOR GPS" The GPS reception condition of your smartphone is poor.
"NO SKIPS" Skips is not allowed.
20
Symptom
No Bluetooth device is
detected.
Pairing cannot be
made.
"DEVICE FULL" appears.
Echo or noise occurs.
Phone sound quality
is poor.
• Voice calling method
TM
is not successful.
• "N/A VOICE TAG"
appears.
"NOT SUPPORT"
appears.
• "NO ENTRY" appears.
• "NO PAIR" appears.
"ERROR" appears.
"NO INFO" appears.
Remedy
• Search from the Bluetooth device again.
• Reset the unit. ( 3)
• Make sure you have entered the same PIN code to both the
unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 12)
The number of registered devices has reached its limit.
Retry after deleting an unnecessary device. ( 15,
DEVICE DELETE)
• Adjust the microphone unit's position. ( 12)
• Check the [ECHO CANCEL] setting. ( 13)
• Reduce the distance between the unit and the Bluetooth
device.
• Move the car to a place where you can get a better signal
reception.
• Use voice calling method in a more quiet environment.
• Reduce the distance from the microphone when you speak
the name.
• Make sure the same voice as the registered voice tag is
used.
The connected phone does not support Voice Recognition
feature.
There is no registered device connected/found via
Bluetooth.
Try the operation again. If "ERROR" appears again, check if
the device supports the function you have tried.
Bluetooth device cannot get the contact information.