Advertisement
A.B.S. Curved Back w/o Mounting Hardware (After 4/20/03)
Recline Only (2GR) and Tilt/Recline (2GTR) w/ V.S.R.
NOTE: Wheelchairs with serial number dated for 2005 and after, call a Customer Service Parts Specialist
for additional information on ordering a warranty ABS Back Pan replacement.
NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back
pan. Back pan material height can be calculated by subtracting 4-3/4" from the overall back height listed.
Material height listed is rounded off to the nearest whole number.
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.
This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.
Overall
Back
Height
20"
21"
22"
23"
24"
25"
26"
NOTE: Wheelchairs with serial number dated for 2005 and after, call a Customer Service Parts Specialist for additional information on
ordering a warranty ABS Back Pan replacement.
Form No. 99-150
#1 Back Pan (16" - 19" W)
Material
Back
16" W
Height
15"
1086042-NLA
16"
1086049-NLA
17"
1086056-NLA
18"
1086063-NLA
19"
1086070-NLA
20"
1086077-NLA
21"
1086084-NLA
To order call toll free 1-800-333-6900, or www.invacare.com
17" W
1086043-NLA
1086044-NLA
1086050-NLA
1086051-NLA
1086057-NLA
1086058-NLA
1086064-NLA
1086065-NLA
1086071-NLA
1086072-NLA
1086078-NLA
1086079-NLA
1086085-NLA
1086086-NLA
68
18" W
19" W
1086045-NLA
1086052-NLA
1086059-NLA
1086066-NLA
1086073-NLA
1086080-NLA
1086087-NLA
Advertisement
