Advertisement
A.B.S. Curved Back w/o Mounting Hardware
Tilt Only (2GT) - (Before 11/1/00)
NOTE: Wheelchairs with serial number dated for 2005 and after, call a Customer Service Parts Specialist
for additional information on ordering a warranty ABS Back Pan replacement.
NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back
pan. Back pan material height can be calculated by subtracting 6-3/4" from the overall back height listed.
Material height listed is rounded off to the nearest whole number.
NOTE: A.B.S. curved backs do not retrofit to the 7/8" round canes. Key slotted back canes and back
attaching hardware must be ordered.
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.
This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.
45
Form No. 99-150
To order call toll free 1-800-333-6900, or www.invacare.com
Advertisement
