Advertisement
A.B.S. Curved Back w/o Mounting Hardware
Recline Only (2GR) and Tilt/Recline (2GTR) w/ V.S.R.
NOTE: Wheelchairs with serial number dated for 2005 and after, call a Customer Service Parts Specialist
for additional information on ordering a warranty ABS Back Pan replacement.
NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back
pan. Back pan material height can be calculated by subtracting 8-3/4" from the overall back height listed.
Material height listed is rounded off to the nearest whole number.
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.
This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.
Item
Number
Note
Part Number
1
See Chart
1
See Chart
2
See Chart
2
See Chart
3
See Chart
3
See Chart
A
1125723
NOTE:
A - Not Shown. Hook Fastener Adhesive Kit is used to attach a Back Cover to the Back Pan and must be ordered when a new
Back Pan or Back Assembly is requested.
Form No. 99-150
(Before 4/21/03)
Description
#1 Back Pan (16" - 19" W)
#1 Back Pan (20" - 22" W)
#2 Back Cushion Assembly (16" - 19" W)
#2 Back Cushion Assembly (20" - 22" W)
#3 Back Assembly w/o Hardware (16" - 19" W)
#3 Back Assembly w/o Hardware (20" - 22" W)
Kit, Hook Fastener w/ Adhesive Back
To order call toll free 1-800-333-6900, or www.invacare.com
60
Quantity Per
Package Assembly
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Advertisement
