Advertisement
A.B.S. Curved Back w/o Mounting Hardware
NOTE: Wheelchairs with serial number dated for 2005 and after, call a Customer Service Parts Specialist
for additional information on ordering a warranty ABS Back Pan replacement.
NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back
pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed.
Material height listed is rounded off to the nearest whole number.
NOTE: After 10/31/00 spacing between the seat pan and the lower side of the back pan was decreased 3"
by adding 3" to the back pan material. Overall back height did not change.
NOTE: A.B.S. curved backs do not retrofit to the 7/8" round canes. Key slotted back canes and back
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.
This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.
Overall
Back
Height
20"
21"
22"
23"
24"
25"
Back cover and foam are sold as a back cushion assembly only.
Overall
Back
Height
20"
21"
22"
23"
24"
25"
Form No. 99-150
Tilt Only (2GT)
(After 10/31/00)
attaching hardware must be ordered.
#2 Back Cushion Assembly 16" Wide - 19" Wide
Material
Back
16" W
Height
16"
1097403
17"
1097410
18"
1097417
19"
1097424
20"
1097431
21"
1097438
#2 Back Cushion Assembly 20" Wide - 22" Wide
Material
Back
Height
16"
17"
18"
19"
20"
21"
To order call toll free 1-800-333-6900, or www.invacare.com
17" W
1097404
1097411
1097418
1097425
1097432
1097439
20" W
1097407
1097408
1097414
1097415
1097421
1097422
1097428
1097429
1097435
1097436
1097442
1097443
56
18" W
1097405
1097412
1097419
1097426
1097433
1097440
21" W
22" W
1097409
1097416
1097423
1097430
1097437
1097444
19" W
1097406
1097413
1097420
1097427
1097434
1097441
Advertisement
