Invacare Pronto R2 Series Servise Manual page 38

PROCEDURE 11
9. Install the battery box(es) into the wheelchair. Refer to
INSTALLING/REMOVING BATTERY BOX(ES) in
PROCEDURE 11 of this manual.
NOTE: New Battery(ies) MUST be fully charged BEFORE
using, otherwise the life of the battery(ies) will be reduced.
B
A
CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S) CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S)
T
T
POSITIVE (+) Battery Terminal/
E
Post and Battery Clamp
R
I
Positive (+) RED
E
Battery Cable
S
Positive (+) RED
Battery Cable
Negative (-) BLACK
Battery Cable
22NF Battery
NOTE: Battery clamps exploded away for clarification purposes only.
NEGATIVE (-) Battery
Terminal/Post
Tie-Wrap
22NF Battery
FIGURE 6 - CONNECTING BATTERY CABLES - BATTERY CLAMP METHOD
NEGATIVE (-) Battery Terminal/
Post and Battery Clamp
NEGATIVE (-) Battery Terminal/Post
DETAIL "B"
RED Battery Clamp Cover
BLACK Battery Clamp Cover
10. If necessary, charge the battery(ies). Refer to CHARG-
ING BATTERIES in the PROCEDURE 11 of this
manual.
Negative (-) BLACK
Battery Cable
Group 22NF Battery
Hex Screw
Mounting Plate Mounting Plate
Battery Clamp
POSITIVE (+) Battery
Terminal/Post
38
BATTERIES
TOP VIEW
DETAIL "A"
EXPLODED
V I E W
POSITIVE (+) Battery
Terminal/Post
Tie-Wrap