ZyXEL Communications UAG Series Cli Reference Manual page 167

Table 92 object-group Commands: Address Groups (continued)
COMMAND
[no] address-object object_name
[no] object-group group_name
[no] description description
object-group address rename group_name
group_name
23.2.2.1 Address Group Command Examples
The following commands create three address objects A0, A1, and A2 and add A1 and A2 to
address group RD.
Router# configure terminal
Router(config)# address-object A0 192.168.1.1
Router(config)# address-object A1 192.168.1.2-192.168.2.20
Router(config)# address-object A2 192.168.3.0/24
Router(config)# object-group address RD
Router(group-address)# address-object A1
Router(group-address)# address-object A2
Router(group-address)# exit
Router(config)# show object-group address
Group name
Description
===========================================================================
TW_TEAM
RD
Router(config)# show object-group address RD
Object/Group name
===========================================================================
A1
A2
UAG CLI Reference Guide
DESCRIPTION
Adds the specified address to the specified address group. The no
command removes the specified address from the specified group.
Adds the specified address group (second group_name) to the specified
address group (first group_name). The
specified address group from the specified address group.
Sets the description to the specified value. The
description.
description: You can use alphanumeric and
characters, and it can be up to 60 characters long.
Renames the specified address group from the first group_name to the
second group_name.
Reference
5
0
Type Reference
Object 1
Object 1
Chapter 23 Addresses
command removes the
no
command clears the
no
()+/:=?!*#@$_%-
167