Vpn Configuration Provisioning Commands - ZyXEL Communications UAG Series Cli Reference Manual

Chapter 19 IPSec VPN
Table 71 vpn-concentrator Commands: VPN Concentrator (continued)
COMMAND
[no] crypto map_name
vpn-concentrator rename profile_name
profile_name

19.2.5 VPN Configuration Provisioning Commands

This table lists the commands for VPN configuration provisioning.
Table 72 vpn-configuration-provision Commands: VPN Configuration Provisioning
COMMAND
vpn-configuration-provision rule {
append | conf_index | insert conf_index
}
[no] activate
crypto map_name
user username
no user
exit
vpn-configuration-provision rule {
delete conf_index | move conf_index to
conf_index }
[no] vpn-configuration-provision
activate
vpn-configuration-provision
authentication auth_method
show vpn-configuration-provision
activation
show vpn-configuration-provision
authentication
show vpn-configuration-provision rules
134
DESCRIPTION
Adds the specified IPSec SA to the specified VPN concentrator. The
command removes the specified IPSec SA from the specified VPN
concentrator.
Renames the specified VPN concentrator (first profile_name) to the
specified name (second profile_name).
DESCRIPTION
Enters the VPN configuration provisioning sub-command mode to add or
edit a rule.
conf_index: The index number of a VPN configuration provisioning rule,
1 to the UAG's maximum number of VPN connection rules.
Turns the VPN configuration provisioning rule on or off.
Specifies the name of the IPSec VPN connection (map_name) to bind to this
VPN configuration provisioning rule's user or group.
Specifies a user or group of users allowed to use the UAG IPSec VPN client
to retrieve the associated VPN rule settings. A user may belong to a
number of groups. If VPN configuration provisioning rules are configured
for different groups, the UAG will allow VPN rule setting retrieval based on
the first match found. Admin or limited-admin users are not allowed.
Removes the VPN configuration provisioning rule's user or user group
configuration. In other words, any users can match the rule. In the GUI
"any" will display in the Allowed User field.
Leaves the sub-command mode.
Deletes or moves the specified VPN configuration provisioning rule.
Turns the VPN configuration provisioning service on or off.
Sets the authentication method the VPN configuration provisioning service
uses to authenticate users.
Displays whether or not the VPN configuration provisioning service is
activated.
Displays the authentication method the VPN configuration provisioning
service uses to authenticate users.
Displays the settings of the configured VPN configuration provisioning
rules.
no
UAG CLI Reference Guide