Installing Non-Combustible Facing Material (Outdoor Side) - Hearth and Home Technologies TWILIGHT-II-B Owner's Manual

C. Installing Non-combustible Facing Mate-
rial (Outdoor Side)
WARNING
Fire Risk.
• Follow these instructions exactly.
• Facing materials must be installed properly to
prevent fi re.
• No materials may be substituted
without authorization by Hearth & Home
Technologies.
• Center and attach two top boards (the two shorter pieces)
to the framing members. See Figure 7.8.
• Use fasteners from fastener packet (in manual bag) in
shaded areas (see Figure 7.8).
• Use regular sheetrock screws in non-shaded areas.
Apply fasteners from
fastener packet
in these areas.
Figure 7.8 Attaching Non-combustible Facing Material
(Outdoor Side Only)
24 Outdoor Lifestyles by Hearth & Home Technologies, Inc. • Twilight-II-B • 2108-900 Rev. V • 5/11
• Attach the left and right side pieces to the framing mem-
bers. (See Figure 7.9).
NON-COMBUSTIBLE
FACING MATERIAL
48-5/8 in.
Figure 7.9 Complete Installation of Non-combustible
Facing Material (Outdoor Side)
• Use a wet or dry towel or soft brush to remove dust or
dirt from facing material.
• Apply a non-combustible adhesive to attach tile, stone
or other non-combustible fi nishing materials per manu-
facturer's instructions.
47-5/8 in.