Formatting External Media - Yamaha Electone Stagea ELS-01 Quick Manual

NOTE
Before purchasing a USB
flash memory device, please
consult your Yamaha dealer,
or an authorized Yamaha
distributor for advice, or see
the Yamaha website (http://
www.yamahamusicsoft.com/).
NOTE
The indications USB 1, USB
2, etc. will be displayed
depending on the number of
the connected media.
NOTE
"USB-FD01" appears in the
display only when a floppy
disk drive has been installed
to the Electone.
7
Do not remove the media
while formatting.
10 ELS-01/01C/01X Version 1.8 New Functions
3

Formatting External Media

If you find that you are unable to use new, blank external media (such as floppy disks or
USB flash memory) or old one that have been used with other devices, you may need
to format them.
Formatting erases all the data in the media and makes it ready to record. The data
erased by formatting will be lost permanently. Check whether or not the media
contains any important data you wish to keep before executing the operation. Proceed
with caution, especially when connecting multiple USB storage media.
1
Connect the media to the USB TO DEVICE terminal.
2
Press the [TOOLS] button at the top right of the display to call up
the TOOLS Page.
3
Press the
is grayed out.
4
Select the desired media you want to format.
To format a USB flash memory, select [USB XX] (USB 01, USB 02, etc.).
To format a floppy disk, select [USB-FD01].
5
Press the [FORMAT] button in the display.
A message appears, prompting confirmation of the operation. Select
[FORMAT] to format the media, or [CANCEL] to abort the operation.
button repeatedly if necessary until the button