Playing Back The Selected Part(S) - Yamaha Electone Stagea ELS-01 Quick Manual

Reference Page
Setting a song (page 12)
7
Reference Page
Converting to XG (page 38)
28 ELS-01/01C/01X Version 1.8 New Functions

Playing Back the Selected Part(s)

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
You can also play back selected parts of your recorded performance, while other parts
are temporarily turned off. This function is especially useful for playing a single part,
such as the melody, over previously recorded accompaniment parts.
To play back the selected part(s):
During playback or in the Settings Display, press each part button to turn the part you
want to playback to "PLAY" and the part you want to mute to "OFF." Each pressing of
a part button switches the status between PLAY and OFF. Pressing the [PART SAVE]
button saves each part's playback status.
To play back the selected part(s) of XG-compatible song data:
Press the Part [XG] button while XG-compatible song data is being played back.
The following XG Part Setup Display appears.
Press the appropriate channel buttons (e.g., the [CH1] button) to set each channel to
playback or mute. Each pressing of a button switches the status: PLAY and OFF. Set a
part to [PLAY] if you want to play it back and [OFF] if you do not.
The [ALL] button enables you to switch all channels to PLAY/OFF at once.
To set each channel's volume use the sliders. Each channel's volume can be adjusted
between 0 and 100.
The [ALL] slider adjusts the overall volume.