Yamaha Electone Stagea ELS-01 Quick Manual page 35

3
Press the [COPY] button in the display to call up the Copy To
Display.
4
(If necessary) Change the destination.
For details on changing the destination, see page 11.
5
Press the [EXECUTE] button to execute the copy.
The folder/song name in the destination is the same as the one of the source
song. If you copy a folder/song to a folder that contains a song whose name is
the same as the source song, the copied name will be "source song name_XXX"
(XXX indicates song number). If you want to change the folder/song name, see
page 18.
If you copy an XG-compatible song to another folder or media that contains a
song with the same name as the source song, a message appears prompting
confirmation of overwriting the song. Selecting [OVERWRITE] overwrites the
XG-compatible song in the destination.
How to cancel the folder-copy operation
If you want to cancel the folder-copy operation while the copy operation is in
progress, press the [CANCEL] button.
However, the operation may take a long time since the stop operation will be
executed only after all files in current folder are copied.
If you cancel the operation, make sure to check which files have been properly
copied and which have not.
Never attempt to eject the
media or turn the power
off during copying (or
moving a protected song).
Data may be lost.
NOTE
While the copy operation is
in progress, the
approximate time of copying
appears on the display;
keep in mind that the actual
time need may differ.
NOTE
If the media copy is
executed, the folder name
"#MEDIA" will be created in
the destination folder.
NOTE
If the message "The source
folder hierarchy is too deep"
is displayed, copy each
folder in the folder, one by
one manually.
If the "Path name is too
long" message is displayed,
change the hierarchy or
rename the folder name
shortly.
NOTE
The copy operation will
automatically be stopped if
an unrecognizable file is
detected in the folder.
Removing the media
during operation may
result in loss of the data.
Never attempt to remove
the media unless the
"Eject the source media"
message appears.
ELS-01/01C/01X Version 1.8 New Functions
7
35