Formatting External Media - Yamaha Electone Stagea ELS-01 Quick Manual

1. M.D.R. Display/Score Display
NOTE
Before purchasing a USB
flash memory device,
please consult your Yamaha
dealer, or an authorized
Yamaha distributor for
advice, or see the Yamaha
website (http://
www.global.yamaha.com/).
NOTE
On the ELS-01, "USB-FD01"
appears in the display only
when a floppy disk drive has
been installed to the
Electone.
Do not remove the media
while formatting.
12 ELS-01/01C/01X Version 1.7 New Functions
3

Formatting External Media

If you find that you are unable to use new, blank external media (such as SmartMedia
cards, floppy disks or USB flash memory) or old one that have been used with other
devices, you may need to format them.
Formatting erases all the data in the media and makes it ready to record. The data
erased by formatting will be lost permanently. Check whether or not the media
contains any important data you wish to keep before executing the operation.
1
Insert the media into the card slot, or connect the device to the
USB DEVICE terminal.
2
Press the [TOOLS] button at the top right of the display to call up
the TOOLS Page.
3
Press the
is grayed out.
4
Select the desired media you want to format.
To format a SmartMedia card, select [SmartMedia]. To format a floppy disk,
select [USB-FD01]. To format another media, select [USB 01].
5
Press the [FORMAT] button in the display.
A message appears, prompting confirmation of the operation. Select
[FORMAT] to format the media, or [CANCEL] to abort the operation.
button repeatedly if necessary until the button