Putting The Earphones On; Connecting; Appendix; Technical Specifications - Silvercrest SK110 User Manual

Sports Headset SK-110

Putting the Earphones on

Hold the first earphone in front
of your face. The open curved
side of the earpiece should face
towards
cushion pads to the inside.
Put the
earphones behind your external
ear and apply slight pressure to
place the ear cushion pad into
your ear (see figure).
Repeat the procedure for the
second earphone.

Connecting

The sports headphones feature a gold-covered 3.5 mm
stereo jack-type plug. Most consumer electronics devices
present a corresponding jack-type receptacle. If your audio
device features a different headphone connector, you can
use a suitable adapter (not supplied). For more information,
consult the User's Manual of your audio device.

Appendix

Technical Specifications

Model
Frequency Response
Impedance
Acoustic noise level at 1
KHz
THD at 1 KHz
Nominal output voltage
Conversion technique
Weight
Cable length
you with
earpiece
the ear
of the
Sports Headset SK-110
20 Hz - 18 kHz
32 Ohms
87 dB (1 kHz / 1 Vrms)
< 1 %
140 mV ±20%
dynamic
approx. 17 g
1.2 m
English
5