Panasonic CS-MKS7NKU Technical & Service Manual page 78

Transmitter
QUIET button
FAN SPEED selector button
FLAP button
ON TIME
Advance button
setting
Return button
buttons
CANCEL button
SENSOR button
ADDRESS switch
NOTE
Transmitter
Sensor
Display
QUIET button
ON/OFF operation button
1 HR. TIMER button
(1-HOUR OFF TIMER)
8
REMOTE CONTROLLER
Display
Temperature display
selector button
The illustration above pictures the remote controller after the cover has been
opened.
When you press the buttons on the remote controller, the
display to transmit the setting changes to the receiver in the air conditioner.
A temperature sensor inside the remote controller senses the room temperature.
Information on the operating conditions is displayed while the remote controller is
switched on. If the unit is turned off, FLAP setting and FAN SPEED setting are
not displayed.
: When you press this button, the fan rotates slower than the fan speed
setting to provide a quieter operating sound.
This button is for turning the air conditioner on and off.
: When you press this button, regardless of whether the unit is operating or
stopping, the unit operates for one hour and then shuts down.
Sensor
ON/OFF operation button
1 HR. TIMER button
Temperature setting buttons (TEMP.)
MODE selector button
NIGHT SETBACK button
HIGH POWER button
Advance button
Return button
CLOCK button
Time display selector button
ACL button
mark appears in the
(Cover closed)
OFF TIME
setting
buttons