Components; Front View - ATEN CL5808 User Manual

Components

Front View

4
5
6
No. Component
1 Upper Handle
2 Module Release
Catches
3 LCD Module
4 Keyboard Module See Keyboard Module, page 8.
5 USB Port
6 Lower Handle
7 External Mouse
Port
8 Power LED
9 LCD Release
Catch
8 Rack Mounting
Tabs
2
1
3
7
8
Pull to slide the LCD module out; push to slide it in.
See Opening the Console, page 19, for details on sliding the
console in and out
In order to slide the console out, you must first release it by
sliding these catches to the inside.
See LCD Module, page 9.
The USB port is available to connect a USB 1.1 peripheral
device (flash drive, CD-ROM drive, etc.) to the switch.
Pull to slide the Keyboard module out; push to slide it in.
A USB mouse port is provided for users who prefer to use an
external mouse.
Lights (blue) to indicate that the unit is receiving power.
These catches (one on each side) release the LCD Module
so that you can slide it away.
Rack mounting tabs are located at each corner of the unit.
See Standard Rack Mounting, page 12, for details.
2
9 10
Description
1. Introduction
7