Shock Technology; Scott Sealed Cable Routing - Scott 2008 Bike Owner's Manual

SHOCK-TECHNOLOGY
The heart of the TC-System is the new developed and
innovative Scott Equalizer TC Shock, offering five
functions which make this system possible.
By using the remote lever you can chose following
functions:
1. ALL TRAVEL MODE: full travel of 165mm
2. TRACTION MODE: by reducing the internal chamber
volume inside the shock the travel of the shock will
be reduced to around 60% (approx. 100mm) the cha-
racteristic of the air spring gets harder. This results in
climbing without "bobbing" and offers still optimum
traction of the rear wheel.
3. LOCK OUT MODE: the shock is locked, climbing on
asphalt roads is now possible without any power loss.
Simultaneous a blow-off-system prevents the shock
being damaged in case the rider did not open the system
while crossing obstacles.
You will find the following positions on the remote
lever: [1]
1
remote lever
In addition following features can be found on the
Equalizer TC Shock:
4. POWER STABILIZER: option to ride with or without
Pedal Platform by just tapping 1 button on the shock.
[2]
5. INTELLIGENT REBOUND VALVE: the new developed
rebound valve can distinguish between soft and hard
impacts and adapts automatically the speed of the
rebound based on this to avoid a kick-back of the shock
after a hard impact or jump.
2
PUSH / PULL
ADJUSTER KNOB
Power Stabilizer ON
Power Stabilizer OFF
rebound knob/ps knob
SCOTT SEALED
CABLE ROUTING
The direct and straight cable system on all our full
suspension models allows Smart Cable Routing which
is very resistant against water and dirt.
To change the cables simply unscrew and open the
cable brackets on the downtube. [3]
3
Smart Cable Routing
04 05
MECHANICS HINT
The outer housing of the cables can also be fixed
on the bottle cage with cable fixers, the two brackets
below the cage are not needed anymore. [4]
4
Mechanics hint