Sundance Spas 880 Series Owner's Manual page 97

D. Operating the USB drive:
1. Plug in your USB device into the "USB" connection on the stereo,
Figure A.
2. Turn power ON to the stereo unit and the stereo remote.
3. The LCD screen on the remote will display the following: "Welcome,"
"USB," "Load," "TOL XX" (final display will vary depending on the
whether the USB holds folders or files). All functions are performed
through the remote.
4. While the music is playing the remote screen will display and
continually scroll through the following: Title, Song, Artist, Album, Dir,
Music and Track information.
5. For operational functions refer to the "External Media Device
Playback" section.
E. Connecting Your Auxiliary Player Using the 3.5 mm Cable:
1. Plug one end of the cable to "Aux" connection on
the stereo, Figure F.
2. Plug the other end of the supplied cable into the
headphone jack connection on the iPod/MP3
Player.
3. Press the Mode button on the remote to "AUX IN."
4. All playback operations are conducted via the
Auxiliary Player. The stereo remote functions do not work
on the external Auxiliary Player (except volume control).
F. Connecting Your Bluetooth Device:
1. Turn power ON to the stereo unit.
2. From your Bluetooth device, make sure the Bluetooth setting is ON.
3. Follow the pairing instructions for your Bluetooth device and connect
to the "BLUEWAVE" device that appears on your screen.
4. If asked for a password, enter the code "0000."
5. The remote LCD screen will display, "BT AUDIO" if the process was
successful.
G. Operating Your Bluetooth Device:
1. Press the seek up or down buttons to scroll through the tracks (on
the remote).
2. Press the volume up or down buttons to adjust volume level between
0 to 30 (on the remote).
3. Any other playback operations are conducted via the Bluetooth
device.
880 SERIES
USB
AUX
Figure F
Page 91