Fujitsu AD11 Manual page 42

AD11 Mainboard Manual
Swap Floppy Drive
Allows you to switch the order of floppy drives.
The options are: Enabled, Disabled.
Boot Up Floppy Seek
When enabled, this feature enable the test of floppy drives to determine
whether they have 40 or 80 tracks.
The options are: Enabled, Disabled.
Boot Up Numlock Status
When set to On, allows the BIOS to automatically enable the Num Lock
Function when the system boots up. The options are: On, Off.
Typematic Rate Setting
The term typematic means that when a keyboard key is held down, the
character is repeatedly entered until the key is released.
The options are: Disabled, Enabled.
Typematic Rate (Chars/Sec)
This feature is available only if the above item, Typematic Rate Setting, is
set at Enabled. Sets the rate of a character repeat when the key is held
down. The options are: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
This feature is available only if the item, Typematic Rate Setting, is set at
Enabled. Sets the delay time before a character is repeated.
The options are: 250, 500, 750, 1000 millisecond.
Security Option
Allows you to set the security level of the system.
The options are: Setup, System.
OS Select For DRAM > 64MB
If your operating system (OS) is OS/2 and main memory size over 64MB,
select the option OS2. Otherwise, stay with the default setting Non-OS2.
The options are: Non-OS2, OS2.
3 - 6