B. Rear Vent
NOTICE: Once appliance is set up for top or rear venting,
it CANNOT be changed at a later time.
Figure 9.7
•
Fold the tabs toward the center of the fi re plug (90º) and
remove the insulation gasket.
Figure 9.8
•
Cut the metal retaining band and fold the sides out.
Figure 9.9
•
Fold the center parts of the retaining band out and use
to remove the vent cap.
Heatilator • Novus NDV Series • 4055-187 Rev F • 06/08
NOTICE: Once the vent cap has been removed it CANNOT
be reattached.
Figure 9.10
•
Discard the vent cap, remove and discard the insulation
basket.
Figure 9.11
•
Attach the fi rst vent section (it will snap into place). Slide
the insulation gasket onto the vent section, up against
the appliance and over the tabs.
37