Computer Input Source Selection - Eiki LC-HDT1000 Owner's Manual

Multimedia projector

Hide thumbs Also See for LC-HDT1000:

Table of Contents

Menu Operation

Press the MENU button to display the On-Screen

Menu. Use the Point ed buttons to select Input and

then press the Point 8 or the SELECT button.

Use the Point ed buttons to select the desired input

and then press the Point 8 button to access the

submenu items.

Use the Point ed buttons to select the desired

source and then press the SELECT button.

✔

Note:

• "Input 3" and/or "Input 4" are selectable only when interface

board(s) are connected to either or both of the slots.

WHEN SELECTING INPUT 1

(COMPUTER INPUT TERMINALS )

RGB(PC analog)

When your computer is connected to the INPUT 1

(ANALOG) terminal, select RGB (PC analog).

Note:

✔

• Input source changes if the INPUT 1 button on the remote

control is pressed.

WHEN SELECTING INPUT (5 BNC INPUT JACKS )

When connecting the computer output [5 BNC Type (Green,

Blue, Red, Horiz. Sync, and Vert. Sync.)] from the computer

to G, B, R, H/HV, and V jacks:

RGB

When your computer is connected to the INPUT 2 (5

BNC INPUT JACKS) terminal, select RGB.

Computer Input Source Selection

INPUT MENU

Input Selection

Table of Contents