Table of Contents
Advertisement
Offset (Red/Green/Blue)
Press the Point
button to lighten red/green/blue tone
7
of the black level of an image; press the Point
deepen red/green/blue tone of the black level of an image
(from 0 to 63).
Note
✔
• When White balance Red, Green or Blue is adjusted, the
Color temp. level will change to Adj..
• Tint cannot be selected when the video system is
SECAM
PAL-M
PAL-N
,
or
Auto picture control
Use the Point 7 8 buttons to select the desired Auto picture
control option (Off, L1 or L2).
Off . . . . Auto picture control OFF position.
L1 . . . . . Auto picture control LEVEL 1 position.
L2 . . . . . Auto picture control LEVEL 2 position.
Advanced color*
Use the Point 7 8 buttons to select the advanced color mode.
Off . . . . Advanced color mode is "Off" .
Auto . . . Advanced color according to the type of image.
*This function controls the operation of the Color Control
Device, which independently and automatically regulates the
amount of yellow light passing through the LCD panel, to
accurately reproduce both image color and image brightness.
Normally leave Auto (default setting).
✔
Note:
• White balance may change depending on the image.
Sharpness
Press the Point
7
button to decrease the sharpness of the
image; press the Point
button to increase the sharpness
8
of the image (from 0 to 31).
Gamma
Use the Point
buttons to adjust the gamma value to
7 8
obtain a better balance of contrast (from 0 to 15).
8
button to
PAL,
(p.46).
Video Input
49
Advertisement
Table of Contents
