Side Control
Side Control
The input source changes each time you press the INPUT button on the side control as follows:
Input 1→Input 2→ ...
Before using the INPUT button on the side control or the remote control, you must select a correct input source
by On-Screen Menu and the latest input source will be displayed.
Remote Control Operation
Press the INPUT 1, INPUT 2, INPUT 3 or INPUT 4 button on the remote control. The input source appears on
the screen as you press each button. Select the connected input source.
INPUT 1 button
Input 1
RGB (PC analog)
RGB (Scart)
RGB(PC digital)
RGB(AV HDCP)
HDMI
✔
Note:
• "Input 3" and/or "Input 4" are selectable only when interface
board(s) are connected to either or both of the slots.
Input Selection
Direct Operation
INPUT button
INPUT button
Input
RGB
y,Pb/Cb,Pr/Cr
Video
S-video
Remote Control
INPUT 1/2/3/4
buttons