Wall-Mount Installation Instructions - Planar PXL2430MW User Manual

Wall-Mount Installation Instructions

Wall Mount Arm not included
Turn the power OFF then disconnect the cables from the
Touchscreen LED Monitor before performing the procedure
below.
1. Lay the Touchscreen LED Monitor face down on a soft
surface.
2. Remove the two pieces of flake and Hinge Cover.
3. Remove the two screws under the flake.
4. Remove the stand.
5. Follow instructions included with the Wall Mount kit.
NOTE
100mmx100mm VESA hole pattern (n=4), M4, pitch =0.7 mm
100mm x 100mm Screw
Mounting Options
13