Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Planar PXL2370MW
Summary of Contents for Planar PXL2370MW
- Page 1 PXL2370MW LED LCD Monitor USER'S GUIDE www.planar.com...
-
Page 2: Table Of Contents
Package Overview ................................5 First Setup...................................6 Front/ Rear View of the Product..........................7 Quick Installation ................................8 Basic Operation and Calibration/Reset Instructions...................9 Advanced Operation—OSD Menu......................... 11 Supporting Timing Modes ............................14 Technical Information ..............................15 Wall-Mount Installation Instructions........................16 Troubleshooting................................17 Planar Support ................................18... -
Page 3: Operation Instructions
Operation Instructions Thank you for purchasing the PXL2370MW LED LCD monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED LCD Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. - Page 4 COMMUNIQUE D’AVERTISSEMENT DE LA FCC CONCERNANT LES INTERFERENCE DE FREQUENCE RADIO: (SEULEMENT POUR MODELES CERTIFIE PAR LA FCC) Ce moniteur a été testé et à été trouvé conforme aux limites pour un appareil numérique de Classe B, suivant la partie 15 des règlements de la FCC. Ces limites ont été développées pour offrir une protection satisfaisante contre les interférences nuisibles dans une installation résidentielle.
-
Page 5: Unpacking Instructions
Unpacking Instructions Remove the LED LCD Monitor out of the package and take off the plastic bag and Polystyrene Foam. Remove base from plastic bag and attach to base. Adjust the display between 0°and 20° Safety Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. - Page 6 Consignes de sécurité Respectez tous les avertissements, les précautions et conseils d’entretien recommandés dans ce manuel de l’utilisateur pour maximiser la durée de vie de votre appareil. A faire : Éteindre le produit avant de le nettoyer. La surface de l'écran tactile peut être nettoyée avec un chiffon doux et propre imprégné d’un nettoyant doux du commerce pour vitres ou d'un mélange à...
-
Page 7: Package Overview
Package Overview LED LCD Monitor Base Power Cord VGA Signal Cable Audio-in Cable HDMI Cable User’s Guide... -
Page 8: First Setup
First Setup Install the stand base 1. Lay the LED LCD Monitor flat on a table with the LED screen face down. To prevent the monitor from being scratched, put a piece of soft cloth on the table on which the screen will be set. 2. -
Page 9: Front/ Rear View Of The Product
Front/ Rear View of the Product ① ②③④⑤⑥⑦ ⑧ ⑨ ⑩ ① LED Indicator ② Power On/ Off ③ Input select/ Confirm Selection ④ Scroll Down/ Adjust Decrease/ Audio Adjust/ Mute * ⑤ Scroll UP/ Adjust Increase/ Picture Mode/ Auto * ⑥... -
Page 10: Quick Installation
Quick Installation Connect either VGA or HDMI Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. Connect the audio cable from audio output of computer to the audio input of the monitor. Connect power cord to a properly grounded AC outlet, and then to the monitor. -
Page 11: Basic Operation And Calibration/Reset Instructions
Basic Operation and Calibration/Reset Instructions Before using the LED LCD Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the LED LCD Monitor on/off: Press button on the Back. The power LED indicator light will be blue when the LED LCD Monitor is on. - Page 12 Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the▲ button for 10 seconds to lock all 5 buttons. The LED LCD Monitor will show a “POWER BUTTON LOCKED” message for 3 seconds and the message will disappear automatically.
-
Page 13: Advanced Operation-Osd Menu
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your LED LCD Monitor. Press the 1 button to display the OSD Menu, and use ▲ or ▼ to select the desired OSD menu. Press 2 to confirm or reach the next sub-menu. To exit press 1. Short Cuts Function from the button(s) AUTO IMAGE ADJUST: To auto adjust Horizontal Position, Vertical Position, Phase (Fine... - Page 14 INPUT SELECT: When Input Select is pressed, change Input signal to D-SUB, HDMI or AUTO. AUDIO ADJUST: To adjust the audio functions. VOLUME: To adjust the volume of speaker output. MUTE: To turn the Mute ON/OFF. AUDIO INPUT: When in HDMI input, select where the audio source comes from AUDIO IN or HDMI.
- Page 15 SETUP MENU: To set up LANGUAGE SELECT, OSD POSITION, OSD TIME OUT, OSD BACKGROUND and LED mode. LANGUAGE SELECT: Allows user to choose from available languages. Press ▲ or ▼ button to select between horizontal and vertical OSD OSD POSITION: Position adjustment.
-
Page 16: Supporting Timing Modes
Supporting Timing Modes STANDARD RESOLUTION 720 x 400 @ 70Hz 640 x 480 @ 60Hz 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA... -
Page 17: Technical Information
Technical Information Panel 23” TFT (with LED backlight) Power Management On: 26 Watts (typical), 30 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.2652 x 0.2652 mm Display Color 16.7M... -
Page 18: Wall-Mount Installation Instructions
Wall-Mount Installation Instructions Preparing to Install the Optional Wall Mount Arm (not included) This LED LCD Monitor can be attached to a wall mounting arm purchased separately. Turn the power OFF then disconnect the cables from the LED LCD Monitor before performing the procedure below. 1. -
Page 19: Troubleshooting
Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply is firmly connected to the LED LCD Monitor . Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage. -
Page 20: Planar Support
Planar Support Cables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com. Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers, warranty information and access to Planar's Technical Library for online trouble shooting. - Page 21 2014 2001132458T...
Need help?
Do you have a question about the PXL2370MW and is the answer not in the manual?
Questions and answers