Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Kramer VS-81HDxl
Summary of Contents for Kramer VS-81HDxl
-
Page 1: User Manual
Kramer Electronics, Ltd. USER MANUAL Model: VS-81HDxl 8x1 HD/SD-SDI Switcher... -
Page 2: Table Of Contents
Figure 8: Using the REMOTE Connector Tables Table 1: VS-81HDxl 8x1 HD/SD-SDI Switcher Features Table 2: MACHINE ID DIP-switch Settings Table 3: Technical Specifications of the VS-81HDxl 8x1 HD/SD-SDI Switcher Table 4: Protocol Definitions Table 5: Instruction Codes for Protocol 2000... -
Page 3: Introduction
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products 2 Download up-to-date Kramer user manuals from the Internet at http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com... - Page 4 Getting Started KRAMER: SIMPLE CREATIVE TECHNOLOGY...
-
Page 5: Overview
• Has an OFF button to disconnect the outputs • Has a front panel lock button The VS-81HDxl is housed in a 19" 1U rack mountable enclosure, and is fed from a 100-240 VAC universal switching power supply. Control the VS-81HDxl via the: •... -
Page 6: Your Vs-81Hdxl 8X1 Hd/Sd-Sdi Switcher
(often associated with low quality cables) • Avoid interference from neighboring electrical appliances that may adversely influence signal quality and position your Kramer VS-81HDxl away from moisture, excessive sunlight and dust Your VS-81HDxl 8x1 HD/SD-SDI Switcher... -
Page 7: Figure 1: Vs-81Hdxl 8X1 Hd/Sd-Sdi Switcher
Your VS-81HDxl 8x1 HD/SD-SDI Switcher Figure 1: VS-81HDxl 8x1 HD/SD-SDI Switcher... -
Page 8: Table 1: Vs-81Hdxl 8X1 Hd/Sd-Sdi Switcher Features
Your VS-81HDxl 8x1 HD/SD-SDI Switcher Table 1: VS-81HDxl 8x1 HD/SD-SDI Switcher Features Feature Function IR Receiver The red LED is illuminated when receiving signals from the Infrared remote control transmitter POWER Switch Illuminated switch for turning the unit ON or OFF... -
Page 9: Using The Ir Transmitter
This distance can be extended to up to 60 meters when used with three extension cables Before using the external IR receiver, be sure to arrange for your Kramer dealer to insert the internal IR connection cable with the 3.5mm connector that fits into the REMOTE IR opening on the rear panel. -
Page 10: Installing In A Rack
5. The machine is earthed (grounded) in a reliable way power and is connected only to an electricity socket with • If you are using a Kramer rack grounding. Pay particular attention to situations where adapter kit (for a machine that is not electricity is supplied indirectly (when the power cord 19"), see the Rack Adapters user... -
Page 11: Connecting Your Vs-81Hdxl 8X1 Hd/Sd-Sdi Switcher
7. Connect the power cord . 1 Switch OFF the power on each device before connecting it to your VS-81HDxl. After connecting your VS-81HDxl, switch on its power and then switch on the power on each device 2 When only one output is required, connect that output, and leave the other output unconnected... -
Page 12: Figure 2: Connecting The Vs-81Hdxl 8X1 Hd/Sd-Sdi Switcher
Connecting Your VS-81HDxl 8x1 HD/SD-SDI Switcher Figure 2: Connecting the VS-81HDxl 8x1 HD/SD-SDI Switcher KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 13: Dip-Switch Settings
The MACHINE ID determines the position of a VS-81HDxl unit, specifying which VS-81HDxl unit is being controlled when several VS-81HDxl units connect to a PC or serial controller. Set the Machine number on a VS-81HDxl unit via MACHINE ID DIP-switches 1, 2, 3 and 4, according to Table When using a standalone VS-81HDxl unit, set the Machine ID to 1. -
Page 14: Controlling Via Rs-232 (For Example, Using A Pc)
To connect a PC to the VS-81HDxl unit, using the Null-modem adapter provided with the machine (recommended): • Connect the RS-232 9-pin D-sub rear panel port on the VS-81HDxl unit to the Null-modem adapter and connect the Null-modem adapter with a... -
Page 15: Controlling Via The Rs-485 Port
VS-81HDxl units. (If using shielded twisted pair cable, the shield is usually connected to the “G” (Ground) PIN of the first unit). 2. Set the first VS-81HDxl unit as MACHINE # 1 and the following seven VS-81HDxl units as MACHINE # 2 to MACHINE # 8, according to... -
Page 16: Switching Genlocked Video Signals
6.6.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable) You can connect the Ethernet port of the VS-81HDxl to the Ethernet port on your PC, via a crossover cable with RJ-45 connectors. This type of connection is recommended for identification of the factory default... -
Page 17: Figure 6: Local Area Connection Properties Window
Connecting Your VS-81HDxl 8x1 HD/SD-SDI Switcher 3. Right-click Local Area Connection Properties. 4. Select Properties. The Local Area Connection Properties window appears. 5. Select the Internet Protocol (TCP/IP) and click the Properties Button (see Figure Figure 6: Local Area Connection Properties Window 6. -
Page 18: Connecting The Ethernet Port Via A Network Hub (Straight-Through Cable)
6.6.2 Connecting the ETHERNET Port via a Network Hub (Straight- Through Cable) You can connect the Ethernet port of the VS-81HDxl to the Ethernet port on a network hub or network router, via a straight-through cable with RJ-45 connectors. 6.6.3 Configuring the Ethernet Port After connecting the Ethernet port, you have to install and configure it. -
Page 19: Operating The Vs-81Hdxl
1 For details of how to route an input to an output using the REMOTE connector, see section 2 Nevertheless, even though the front panel is locked you can still operate via RS-232 or RS-485, as well as via the Kramer... -
Page 20: Technical Specifications
Technical Specifications Table 3 includes the technical specifications: Table 3: Technical Specifications of the VS-81HDxl 8x1 HD/SD-SDI Switcher INPUTS: 8 SDI SMPTE-259M, 292M, 344M, 424M serial video, 75 ohms on BNC connectors 1 GENLOCK 75Ω / Hi-Z on looping BNC connectors, bi-level, Tri-level inputs... -
Page 21: Kramer Protocol 2000
The default data rate is 9600 baud, with no parity, 8 data bits and 1 stop bit. The VS-81HDxl machine uses a sub-set of Protocol 2000. Only these commands are described below:... -
Page 22: Table 5: Instruction Codes For Protocol 2000
This code is also returned to the PC if an RS-232 instruction is sent while the machine is being programmed via the front panel. Reception of this code by the switcher is not valid. KRAMER: SIMPLE CREATIVE TECHNOLOGY... - Page 23 Kramer Protocol 200030F NOTE 13 - This is a request to identify the switcher/s in the system. If the OUTPUT is set as 0, and the INPUT is set as 1, 2, 5 or 7, the machine will send its name. The reply is the decimal value of the INPUT and OUTPUT. For example, for a 2216, the reply to the request to send the audio machine name would be (HEX codes): 81 (i.e.
- Page 24 EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
- Page 25 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the VS-81HDxl and is the answer not in the manual?
Questions and answers