Mezzanine Cards - Fujitsu PRIMERGY BX924 S2 Options Manual

6

Mezzanine cards

One or two mezzanine cards can be installed in a BX924 S2 server blade.
Additional Fibre Channel, Ethernet and/or Infiniband I/O channels can be set up
using these cards.
All mezzanine cards have the same form factor.
Figure 8: 8 Gbit/s fibre-channel card with 2 ports
The mezzanine cards are fastened on a special carrier and then connected
together with the carrier to the system board.
The figure below shows an unpopulated carrier for mezzanine cards.
Options Guide 27
BX924 S2