Fujitsu D2863 Tehnical Manual page 32

Connectors and indicators
The separate management LAN connector is used as a management interface
(iRMC S2) and is prepared for operation with the Remote Management.
Optionally LAN connector 1 can also be used for iRMC S2 server management.
Each LAN connector has two LEDs which display the speed of the connection
and its status:
Figure 8: LAN LEDs
LED Indicator
I LAN speed
(management
LAN)
J LAN
link/transfer
(management
LAN)
K LAN speed
(system LAN/
shared LAN)
L LAN
link/transfer
(system LAN/
shared LAN)
32
Description
Steady orange signal in the event of a LAN transfer
rate of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Steady orange signal in the event of a LAN transfer
rate of 1 Gbit/s
Steady green signal in the event of a LAN transfer
rate of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Technical Manual
D2863 (RX100 S6)