Ford Explorer 2011 Owner's Manual page 66

Climate Controls
automatically when MAX A/C is selected or can be engaged manually in
any airflow mode except
automatically in all airflow modes except MAX A/C to reduce fog
potential.
4. DUAL: Press to activate dual zone (separate passenger temperature
control). Press again to deactivate and return to single zone temperature
control (where the driver settings control the temperature for the entire
vehicle).
5. Passenger temperature control: Press to activate dual zone
temperature and to increase (+) or decrease (-) the temperature on the
passenger side of the vehicle.
6. (Fan speed control): Press to manually increase (+) or decrease
(-) the fan speed.
7. Driver temperature control: Press to increase (+) or decrease (-)
the temperature on the driver side of the vehicle. If the passenger
temperature controls are not activated (dual zone), the driver's settings
will determine the temperature setting for the entire vehicle cabin.
8. (Power): Press to activate/deactivate the climate control system.
When the system is off, outside air is prevented from entering the
vehicle through the vents.
9. AUTO: Press to engage full automatic operation. Select the desired
temperature using the temperature control. The system will
automatically determine fan speed, airflow distribution, A/C on or off,
and outside or recirculated air, to heat or cool the vehicle to reach the
desired temperature.
10. (Rear defroster): Press to activate/deactivate the rear
R
defroster. This button will also activate/deactivate the heated mirrors (if
equipped). Refer to Rear window defroster later in this chapter for
more information.
11. (Defrost): Distributes outside air through the windshield
defroster vents and demister vents. Can be used to clear the windshield
of fog and thin ice. Press this button again to return to the previous air
flow selection. To return to full automatic control, touch AUTO.
66
2011 Explorer (exp)
Owners Guide, 3rd Printing
USA (fus)
(defrost). Recirculated air may turn off