Russell Hobbs 14993 Instructions Manual
  1. Manuals
  2. Brands
  3. Russell Hobbs Manuals
  4. Iron
  5. 14993
  6. Instructions manual

Russell Hobbs 14993 Instructions Manual

Iron
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

instructions

Advertisement

Table of Contents
loading

Related Manuals for Russell Hobbs 14993

Summary of Contents for Russell Hobbs 14993

  • Page 1 instructions...

  • Page 2: Important Safeguards

    Read the instructions and keep them safe. If you pass the iron on, pass on the instructions too. Remove all packaging, but keep it till you know the iron works. important safeguards Follow basic safety precautions, including: 1 The iron must only be used by or under the supervision of a responsible adult. Use and store it out of reach of children.

  • Page 3: Temperature Setting Guide

    19 Take care not to scratch the soleplate – avoid buttons, zips, etc. 20 The iron has a protective thermal fuse, which will blow if it overheats. If this happens, the iron will stop working, and must be returned for repair. 21 Don’t use the iron if it’s dropped or damaged, or if it malfunctions or leaks.

  • Page 4: Steam Ironing

    reducing temperature 17 Reducing the temperature takes a bit longer, as the element has to lose the heat it has built up, so be patient. It’s best to organise your ironing so that you don’t need to reduce the temperature (“preparation” page 3, point 2). steam ironing 18 When steam ironing, you must set the temperature control at S or higher (#3).

  • Page 5: After Use

    39 Check that pockets, turn-ups, and cuffs are empty. 40 Check that there’s water in the reservoir. 41 Turn the temperature control to bring max opposite the notch. 42 Wait till the thermostat light goes out. 43 Hold the iron close to (but not touching) the fabric. 44 Press the S button (you’re using the “shot of steam”...
  • Page 6 cleaning 71 Unplug the iron when not in use, before moving and before cleaning. Let it cool down fully before cleaning and storing away. 72 Wipe outer surfaces with a damp cloth. If necessary, use a little washing-up liquid. 73 Remove spots from the soleplate with a little vinegar. 74 Take care not to scratch the soleplate.

  • Page 8: Connection

    connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.

This manual is also suitable for:

14991

Table of Contents