Power Windows - Ford Fusion Hybrid 2010 Owner's Manual

Hide thumbs Also See for Fusion Hybrid 2010:
Table of Contents

Advertisement

located in the top left corner is turned on. Refer to the indicator light
code below for the power point status.
Note: Using the 110V AC power point for long periods of time without
running the engine will cause your battery to drain.
Green light is on — Power point is ready to supply power
Green light is off — Power point power supply is off. Ignition is not on
Green light is blinking — Power point is in fault mode

POWER WINDOWS

WARNING: Do not leave children unattended in the vehicle and
do not let children play with the power windows. They may
seriously injure themselves.
WARNING: When closing the power windows, you should verify
they are free of obstructions and ensure that children and/or
pets are not in the proximity of the window openings.
Press and pull the window switches
to open and close windows.
• Press down (to the first detent)
and hold the switch to open.
• Pull up (to the first detent) and
hold the switch to close.
Rear Window Buffeting: When one or both of the rear windows are
open, the vehicle may demonstrate a wind throb or buffeting noise. This
noise can be alleviated by lowering a front window approximately
2–3 inches (5–8 cm).
One-touch up or down (driver's window only)
This feature allows the driver's window to open or close fully without
holding the control down.
2010 Fusion Hybrid (hfv)
Owners Guide, 3rd Printing
USA (fus)
Indicator light Code
Driver Controls
93

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents