Editing Effects; Turning Effects On & Off - DigiTech Element Owner's Manual

Editing Effects

Selecting a preset and/or Tone/FX Bank is the fastest and easiest way to achieve the sound your
after. However, if you just can't seem to quite get the sound you're after it's time to edit some
effects.
To edit effects:
Press either of the
1.
For a list of effect settings, see "The Effects" on page 25.
Once you have selected the effect for editing, strum your guitar then turn the
2.
to change the effect settings. Repeat this auditioning process until you find the desired setting.
To exit Edit Mode, press either
3.
NOTE: Effects changed in Edit Mode will need to be stored to a preset in order to be retained. The
exceptions are the Master Level and drum machine settings, which are global
stored to memory. See "Storing/Copying Presets" on page 17 for further information on storing
presets.
Turning Effects On & Off
The procedure for turning effects on and off is essentially the same as for editing effects.
To turn an effect on or off:
Press either of the
1.
or off is lit.
Turn the
2.
SELECT
to enable the effect and select between the available options. If the effect is already on and
you wish to turn it off, keep turning the
LED display.
When done, press either
3.
loaded preset number being displayed in the LED display.
NOTE: Parameters changed in Edit Mode will need to be stored to a preset in order to be retained.
The exceptions are the Master Level and drum machine parameters, which are global parameters and
are not stored to memory. See "Storing/Copying Presets" on page 17 for further information on
storing presets.
16
buttons repeatedly until the LED for the effect you wish to edit is lit.
EDIT
FOOTSWITCH
buttons repeatedly until the LED for the effect you wish to turn on
EDIT
knob. If the effect is already turned off, turn the
FOOTSWITCH
.
knob to the left until
SELECT
to return to Play Mode, indicated by the currently
SELECT
settings and are not
knob to the right
SELECT
is shown in the
off
knob