Oven Control Functions; Setting Oven Controls; Setting The Clock; Changing Oven Temperature Display (F° Or C°) - Crosley ELECTRIC RANGE Use & Care Manual

OVEN CONTROL FUNCTIONS

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below.
Clock pad— Use to set
the time of day.
Oven Light— Use to
turn interior oven light
on and off
Feature indicator
lights — These
indicator lights show
which feature is active.
Clean pad— Use to set
a Self-clean cycle.
Timer On/Off pad— Use
to set or cancel the minute
timer. The minute timer does
not start or stop cooking.
Timer On/Off pad is used
to set the continuous bake
function.

SETTING OVEN CONTROLS

Setting the Clock

When the appliance is first plugged in or when the power
supply to the appliance has been interrupted, the display
will flash "12:00".
NOTES
The time of day must first be set in order to operate the
oven.
The clock cannot be changed when the oven is set for
cooking or Clean is active.
To set the clock:
1. Press Clock once (do not hold key pad down).
2. Within 5 seconds, press and hold the
the correct time of day appears in the display.
14
Bake time pad— Use
to enter the length of
baking time desired.
Start time pad— Oven, Preheat and Door Locked lights — The
Use to set the "Oven" light will glow each time the oven turns on to
desired start time maintain the set oven temperature. The "Preheat" light
for baking & Self- will glow when the oven is first set to operate, or if the
Clean. May be used desired temperature is reset higher than the actual oven
with Bake time to temperature. The "Door Locked" light will flash when
program a delayed the oven door locks and unlocks, the oven door lockout is
timed bake. active or when the self-clean cycle feature is active.
or
Up and down arrow pads— Use with the
feature or function pads to set oven
temperature, bake time, start time, clean time
(when programming an automatic start time),
setting or adjusting the clock and minute timer.
Changing temperature display (°F or °C)
The electronic oven control is set to display °F (Fahrenheit)
when shipped from the factory. The oven may be
programmed for any temperature from 170°F to 550°F
(77°C to 287°C).
NOTE
The temperature display feature cannot be changed
when the oven is set for cooking or Clean is active.
To change the temperature to display °C (Celsius) or
from °C to °F:
1. Press Broil. "— —" appears in the display.
2. Press and hold the
until
3. Press and hold Broil until °F or °C appears in the display.
4. Press the
5. Press any control pad to return to normal operating
mode.
Bake pad—Use to
select the bake feature.
Broil pad— Use to select
the variable broil feature.
Convec pad— Use to
select the convection
feature.
Clear/Off pad— Use to
clear any feature
previously entered except
the time of day and
minute timer. Press
Clear/Off to stop
cooking.
Also use Clear/Off to
activate oven lockout
feature.
until "HI" appears in the display.
or to change °F to °C or °C to °F.