Private Mode; Using The System - TV Ears Wireless Speaker User Manual

Step 2 | Place and Power the TV Ears Transmitter
The transmitter lights must be in direct line of sight with the speaker so the speaker can receive the infrared
signal.
1. Place the transmitter on a flat surface 3 - 5 feet off the ground.
2. Point the front of the transmitter towards the seating area where the speaker will be used. Plug the
end of the AC adapter
3. Plug the AC adapter into a standard electrical outlet or surge protector.
Note: The transmitter will not operate properly if unplugged from an electrical source and must remain
plugged-in to transmit the infrared signal.
Step 3 | Place and Power the Wireless Speaker
The transmitter sends the audio via an infrared signal to the speaker. For clear reception, the back of the
speaker at least 3-4 inches from any solid surface.
1. Place the speaker on a flat surface at least 3 – 5 feet off the ground.
2. Plug the end of the AC adapter

Using the System

| Functions
ON and Volume: Turn the volume knob
to your preference.
OFF: Turn the volume knob
|

Private Mode

The included ear buds or another headset of your choice can be plugged into the Headphone
jack on the front of the speaker. This will turn off the sound to the speaker and only send sound to
the headphones. Headphones can be used when listening to a music device as well.
| Using the Speaker with Music Devices
1. Plug one end of the 3 ft. Auxiliary Cord into the headphone jack of the music device.
2. Plug the opposite end of the Auxiliary Cord into the port labeled 'Aux In'
speaker.
3. Turn ON the music device and set the volume to ¾ of the full volume.
4. Turn ON the speaker and adjust the volume to your preference level.
Note If the auxiliary cord is being used to extend the audio cord, unplug the auxiliary cord to use
with the music device and reconnect it when finished.
Repairs
Before sending in your TV Ears products for repair, please call our customer service representatives for
troubleshooting assistance. If we are unable to resolve the problem or if the product needs to be repaired a
Return Merchandise Authorization (RMA) number will be issued. RMA numbers allow TV Ears to keep track
of your product and return it to you quickly. Be sure to get the address of the local repair center when
obtaining a RMA number. All returned items must have a RMA number.
Obtain a RMA number by calling TV Ears Customer Service:
• US Corporate Office Toll Free: 1-888-883-3277
o
Monday - Friday 7:00AM - 4:00PM PST
o
into the port labeled '12V'
into the port labeled '12V DC'
clockwise to turn the speakers on and adjust the volume
counter clockwise until you feel or hear it click off.
on the back of the transmitter.
on the back of the speaker.
on the back of the