Warning: To reduce the risk of fire or electric shock, do not expose the TV Ears product to rain or moisture. The TV Ears product should not be exposed to dripping or splashing liquids. Do not place objects filled with liquid such as vases on or near the TV Ears product.
Table of Contents Important Safety Instructions Included in Box Ideal TV Ears Set Up Installation instructions Step 1 Connect the Transmitter to Your TV Step 2 Place and Power the Digital Transmitter Step 3 Using the Speaker Alternative Installation | Digital Audio...
Ideal TV Ears Set Up The infrared diodes must be in direct line of sight with the speaker so the speaker can receive the infrared signal.
Page 7
tansmitter should be placed on a flat surface 3 to 5 feet off the ground and should be pointed towards the area where the speaker will be placed.
2. Plug the single end of the audio cord into the port labeled Analog Audio In on the back of the TV Ears transmitter. 1. Ports on the front of TVs are usually audio in ports and will not send sound to your TV Ears speaker.
Installation | Step 2 Place and Power the Digital Transmitter The infrared diodes must be in direct line of sight with the speaker so the speaker can receive the infrared signal. 1. Place the transmitter on a flat surface 3 - 5 feet off the ground and point it towards the area where the speaker will be placed.
Installation | Step 3 Using the Speaker Each speaker comes with a 360º receiving dome on the top of the speaker for 360º signal reception wherever it is placed. 1. Plug the ac adapter into the port labeled power on the back of the speaker.
2. If using the optical cord, remove clear sleeves from each end. Plug in the appropriate digital audio cable into the appropriate jack labeled Digital Audio In on the back of the TV Ears transmitter. 3. Plug the other end of the digial audio cord into your chosen digital audio output jack of your TV, satellite, or cable box.
TV menu. Not all TVs have the ability to switch from a variable to a fixed audio out (consult your television manual or manufacturer). When the TV is set to a “Variable” audio out setting, the volume of the TV Ears headset will be the same volume as the TV.
Repairs or alterations performed by non-authorized TV Ears representatives will void the warranty and may damage the equipment. Also if the TV Ears product is taken outside of the US the warranty becomes void. This warranty is provided at the discretion of TV Ears, Inc. and does not cover cosmetic damage or damage due to acts of nature, accident, misuse, abuse, negligence, commercial use, or modification of or to any part of the product.
TV•EARS® Inc. reserves the right to change product content and product specifications without notice. CE Declaration of Conformity TV Ears is in compliance with the essential safety requirements and other relevant provisions of Standard IEC 60065:2001 + Ammd 1:2005 / EN 60065:2002 and Directive 2004/108/EC; 2006/95/EC, 89/336/EEC, 92/31/ EC, 93/68/EEC. Before putting the device into operation, please observe the respective country specific regulations.
Technical Specifications Specifications System Modulation Infrared, Mono Carrier frequencies 2.3 MHz Range 2000 sq. ft (185.5 m Audio frequency response 80-18,000 Hz < 1% Speaker Max SPL 90 dB Power Supply DC Switching Power Supply 12v, 0.8A Weight 3.15 lbs (50.4 oz) Height 4.25”...
Page 16
Other TV Ears Products Since 1998 TV Ears 3.0 System MSRP $129.95 Item # 11341 TV Ears has 3.0 Headset, 3.0 Transmitter, Audio Cord, and AC Adapter been helping people hear TV. Backed by the recommendation TV Ears Digital System of thousands MSRP $229.95 Item # 11241...