Lenovo ThinkServer RD240 Hardware Maintenance Manual page 54

Figure 19. Removing the bezel of the optical drive cage
8. Touch the static-protective package that contains the new optical drive to any unpainted metal surface
on the server. Then, remove the optical drive from the package and place it on a static-protective
surface.
9. Follow the instructions that come with the optical drive to set jumpers or switches, if there are any.
10. Pay attention to the up and down position of the optical drive and slide the optical drive into place.
Figure 20. Sliding the optical drive into the drive cage
11. Install the two retaining screws to secure the optical drive in the cage.
48
ThinkServer RD240 Hardware Maintenance Manual