Ford Mondeo Owner's Handbook Manual page 103

Note: Avoid adjusting the settings when
the vehicle interior is extremely hot or
cold. The automatic climate control
adjusts to the current circumstances
automatically. For the system to function
properly, the side and centre vents should
be fully open.
Note: At low outside temperatures, when
the system is in auto mode, the air stream
will be directed to the windscreen and the
side windows as long as the engine is
cold.
Note: For information on the automatic
climate control, on vehicles fitted with a
combined Navigation and automatic
climate control system, see separate
handbook.
Setting the temperature
E70304
You can set the temperature between
16ºC (61ºF) and 28ºC (82ºF) in steps of
0.5ºC (1ºF). In position LO (below 16ºC
[61ºF]) the system will switch to
permanent cooling, in position HI (above
28ºC [82ºF]) to permanent heating, and
will not regulate a stable temperature.
Mono mode
In mono mode, the temperature settings
for both the driver's and passenger's side
are linked. If you adjust the temperature
using the rotary control on the driver's
side, the same temperature will be set for
the passenger's side. MONO is shown
in the display.
Climate control
To switch mono mode off
Select a temperature for the passenger's
side using the rotary control on the
passenger's side. Mono mode will switch
off and MONO disappears from the
display. The temperature for the driver's
side will remain unchanged. You can now
adjust the driver's and passenger's side
temperatures independently of each
other. The temperatures are shown in the
display. You can set a difference of up to
4ºC (7ºF).
Note: If you set a difference of greater
than 4°C (7ºF), the temperature on the
other side will be adjusted so that the
difference remains at 4°C (7ºF).
Note: If you set one of the sides to HI or
LO, both sides will be set to HI or LO.
To switch mono mode back on
Press the MONO button. MONO is
shown in the display, and the passenger's
side temperature will be adjusted to the
driver's side temperature.
Blower
High speed
Low speed
Use the buttons to adjust the blower
speed.
The blower setting is shown in the display.
101