Related Manuals for Dynex DX-PS06CC
Summary of Contents for Dynex DX-PS06CC
- Page 1 Cross-Cut Paper Shredder DX-PS06CC U S ER G U I D E Before using your new product, please read these instructions to prevent any damage.
-
Page 2: Table Of Contents
Cross-Cut Paper Shredder Contents Important safety instructions..............2 Features ....................4 Package contents ..................4 Setting up the shredder ................6 Using the shredder..................6 Maintaining ....................7 Troubleshooting..................8 Specifications....................9 One-year limited warranty..............11 Important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Keep out of reach of children and pets. - Page 3 Cross-Cut Paper Shredder NEVER dispose of flammable chemicals or materials that have come into contact with flammable chemicals (for example, nail polish, acetone, gasoline) in the shredder basket. Never shred plastic (except credit cards), any hard materials, continuous forms, newsprint, or anything with adhesives including labels and envelopes.
-
Page 4: Features
DX-PS06CC Avoid loose clothing or jewelry touching the document feed opening. Do not shred paper with paperclips or staples. Do not shred gummed or wet paper. Shred paper and credit cards only. No cardboard, plastic sheets, or CD/DVDs. Do not exceed the shredders maximum capacity of six sheets. - Page 5 Cross-Cut Paper Shredder Shredder details Ready Overheat DX-PS06CC Feature Description Shredder head Contains the control panel and the cutting head. Waste basket Shredded paper goes into this basket. Keep emptied. Clear window Empty the waste basket when the shredded paper reaches 2/3 of capacity.
-
Page 6: Setting Up The Shredder
DX-PS06CC Setting up the shredder Warning: Crosscut shredders have very sharp exposed blades on the underside. Use care when mounting the shredder on the wastebasket. Caution: The shredder should not be plugged in during assembly. Note: The following illustrations are for information purposes only. Your actual shredder may look somewhat different than the shredder shown. -
Page 7: Maintaining
Cross-Cut Paper Shredder Plug in the power cord. To begin shredding, locate the switch on the top of the shredder and select the On/Auto mode. The green power LED indicates the shredder is on and ready to use. Caution: Never shred paper clips, window or insulated envelopes, continuous forms, newsprint, transparencies, laminated documents, cardboard, any items with adhesives, hard materials, or plastic (except credit cards). -
Page 8: Troubleshooting
DX-PS06CC Troubleshooting If there is a problem with your shredder, check below for the symptoms and steps to resolve. If you continue to have problems, contact customer support at our Service Center. DO NOT ATTEMPT TO REPAIR BY OPENING THE SHREDDER HEAD. This will completely void the product warranty. -
Page 9: Specifications
Cross-Cut Paper Shredder Specifications Product dimensions 14.3 in H x 12.5 in W x 7.3 in D (36.2cm x 31.8cm x 18.5cm ) Duty cycle 2 minutes ON / 30 minutes OFF Sheet capacity Six sheets of 20 lb. bond paper (one folded sheet of paper equals two sheets of paper.) Paper shred size 0.19 x 1.34 in (5 x 34 mm) - Page 10 DX-PS06CC...
-
Page 11: One-Year Limited Warranty
If service of products and parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Dynex Product during the Warranty Period. - Page 12 7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645 © 2013 BBY Solutions, Inc. All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
- Page 13 7601 Penn Ave. South, Richfield, MN 55423 U.S.A. © 2013 BBY Solutions, Inc. All rights reserved. DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.