Dynex DX-PS10MC Quick Setup Manual

10-sheet Microcut DVD/CD Paper Shredder
DX-PS10MC
QUICK SETUP GUIDE

Features

GoECO™ Power-Saving Technology (patent-pending) consumes energy
only during actual shredding. This means the shredder does not use power
when it is in stand-by mode.

Control panel

LED

Power Lights green when the shredder is in use.
Turns off when the shredder is in stand-by (power saving) mode.
Door Open Lights yellow if the wastebasket is opened or the shredder head is not
mounted correctly.
Overheat/Overload Lights red when the shredder is jammed or overheated. You have inserted more
sheets of paper than recommended or the shredder has been used too long.
Please reduce the number of sheets or stop shredding until the light turns off.

Power switch

AUTO The shredder starts automatically when an item is inserted into the paper or disc slot.
When the item has passed through the slot, the shredder stops.
Caution: Always feed paper in as straight as possible.
Caution: Do not insert more than ten sheets of paper, one credit card, or one disc at a time.
REV Use the reverse setting to clear a paper jam or to pull out unshredded paper.
Caution: Never try to clear a jam by using REV when the wastebasket is full. This could
make the jam worse.
OFF Turns off the shredder.
Warning: Always turn off the shredder when it is not in use.
Power
Door Open
Overheat
Overload