Dynex DX-PSJMCC Quick Setup Manual

Package contents

• Shredder with wastebasket
• Quick Setup Guide
WARNING Do not shred Do not spray Avoid getting
paper with or keep any your hair or face
To avoid injury to
paperclips. Do aerosol near the
yourself and
not shred products in document feed
others, please
gummed or or around opening. Do not
follow safety
wet paper. shredder. let hair touch the
instructions
document feed
before operating
opening. Serious
this device.
injury may result.
Features
Ready
On/Auto Off
Reverse
Before using your new product, please read these instructions to prevent any damage.
Avoid loose Avoid touching Product is Read Insert one
clothing or the document not intended instructions credit
feed opening for use by
jewelry before use. card into
touching the with your children the credit
document hands. (product is card slot.
Never insert not a toy).
feed
opening. your hand or
fingers into the
feed opening.
Countertop Mail Cross Cut Shredder | DX-PSJMCC
Setting up your shredder
1 Place the shredder head securely on the included wastebasket. Make sure
that the safety interlock labels on the sides are aligned. If they are not,
your shredder will not work.
:
Caution Your shredder has very
sharp, exposed blades on the
Do not
underside. Use care when setting
exceed the
up your shredder. Do not use bags
shredder's
maximum
to line your wastebasket.
capacity of
3 vertically
folded
sheets of
letter size
paper.
2 Connect the power cord to a power outlet.
# Item
1 Shredder head
2 Document feed
opening
3 Switch
4 Ready LED indicator
5 Wastebasket
Quick Setup Guide
Side of shredder
Description
Contains the control panel and the cutting
head.
Put paper (3 vertically folded sheets of letter
size paper) or a single credit card into this
opening to shred.
On/Auto ( | ) - Shreds items inserted into the
document feed opening, then stops.
Off () - Turns off the shredder.
Rev ( ) - Reverses the paper to clear a jam or
remove unshredded paper.
Lights green when the power is on.
Empty when 2/3 full.